Telkom - 5102G

Home DSL Router

The Telkom ADSL 5102G complies with ADSL2+ standards for worldwide deployment and supports downstream rates of up to 24 Mbps and upstream rates of up to 1 Mbps. It's designed for small office, home office and residential users, enabling even faster speedInternet connections. User can enjoy ADSL services and broadband multimedia applications such as interactive gaming, video streaming and real-time audio much easier and faster than ever before.



ADSL Multi-Mode Standard

Supports downstream rates of up to 24 Mbps and upstream rates of up to 1 Mbps. Italso supports rate management that allows ADSL subscribers to select an Internetaccess speed suiting their needs and budgets. It is compliant with Multi-Mode standard(ANSI T1.413, Issue 2; G.dmt(G.992.1); G.lite(G992.2)), G.hs(G994.1), G.dmt.bis(G.992.3), G.dmt.bisplus (G.992.5)). The Annex A and B are supported in different H/Wplatforms.

Wireless Ethernet 802.11g

With built-in 802.11g access point for extending the communication media to WLAN while providing the WEP and WPA for securing your wireless networks.

Fast Ethernet Switch

A 10/100Mbps fast Ethernet switch is built in with automatic switching between MDIand MDI-X for 10Base-T and 100Base-TX ports. An Ethernet straight or cross-overcable can be used directly for auto detection.

Multi-Protocol to Establish a Connection

Supports PPPoA (RFC 2364 - PPP over ATM Adaptation Layer 5), RFC 1483encapsulation over ATM (bridged or routed) and PPP over Ethernet (RFC 2516). Theproduct also supports VC-based and LLC-based multiplexing.

Quick Installation Wizard

Supports a WEB GUI page to install this device quickly. With this wizard, end users canenter the information easily which they get from their ISP, then surf the Internetimmediately.

Universal Plug and Play (UPnP) and UPnP NAT Traversal

This protocol is used to enable simple and robust connectivity among stand-alonedevices and PCs from many different vendors. It makes network simple and affordablefor users. UPnP architecture leverages TCP/IP and the Web to enable seamlessproximity networking in addition to control and data transfer among networked devices.With this feature enabled, users can now connect to Net meeting or MSN Messengerseamlessly.

Network Address Translation (NAT)

Allows multi-users to access outside resources such as the Internet simultaneouslywith one IP address/one Internet access account. Many application layer gateway(ALG) are supported such as web browser, ICQ, FTP, Telnet, E-mail, News,Net2phone, Ping, NetMeeting, IP phone and others.


Supports simple firewall with NAT technology and provides option for blocking accessfrom Internet, like Telnet, FTP, TFTP, WEB, SNMP and IGMP.

Domain Name System (DNS) relay

Provides an easy way to map the domain name (a friendly name for users such and IP address. When a local machine sets its DNS server with this router's IP address, every DNS conversion request packet from the PC to this routerwill be forwarded to the real DNS in the outside network.

Dynamic Domain Name System (DDNS)

The Dynamic DNS service allows you to alias a dynamic IP address to a statichostname. This dynamic IP address is the WAN IP address. For example, to use the service, you must first apply for an account from a DDNS service like

PPP over Ethernet (PPPoE): 

Provides embedded PPPoE client function to establish aconnection. Users can get greater access speed without changing the operationconcept, sharing the same ISP account and paying for one access account. No PPPoEclient software is required for local computer. The Automatic Reconnect and DisconnectTimeout (Idle Timer) functions are provided, too.

Virtual Server: 

User can specify some services to be visible from outside users. Therouter can detect incoming service request and forward it to the specific local computerto handle it. For example, user can assign a PC in LAN acting as WEB server inside andexpose it to the outside network. Outside user can browse inside web server directlywhile it is protected by NAT. A DMZ host setting is also provided to a local computerexposed to the outside network, Internet. Users can specify some services to be visible from outside users. The router candetect incoming service requests and forward either a single port or a range of ports tothe specific local computer to handle it. For example, a user can assign a PC in theLAN acting as a WEB server inside and expose it to the outside network. Outside userscan browse inside web servers directly while it is protected by NAT. A DMZ host settingis also provided to a local computer exposed to the outside network, Internet.

Dynamic Host Configuration Protocol (DHCP) client and server

In the WAN site, the DHCP client can get an IP address from the Internet ServiceProvider (ISP) automatically. In the LAN site, the DHCP server can allocate a range ofclient IP addresses and distribute them including IP address, subnet mask as well asDNS IP address to local computers. It provides an easy way to manage the local IPnetwork.

RIP1/2 Routing

Supports RIP1/2 routing protocol for routing capability.

Simple Network Management Protocol (SNMP)

It is an easy way to remotely manage the router via SNMP.

Web based GUI

Supports web based GUI for configuration and management. It is user-friendly andcomes with on-line help. It also supports remote management capability for remoteusers to configure and manage this product.

Firmware Upgradeable

Device can be upgraded to the latest firmware through the WEB based GUI.

BIPAC 5102 series ADSL2+ Modem/Router

CD-ROM containing the on-line manual RJ-11 ADSL/telephone Cable

Ethernet (CAT-5 LAN) Cable

AC-DC power adapter (12VDC, 1A) : BIPAC 5102 / 5102G

AC-AC power adapter (9VAC, 1A) : BIPAC 5102S

This Quick Start Guide

Host Username Password admin admin
Name Version Type Category
001_Telkom%20ADSL%205102G%20Quick%20Start%20G 1.0 Quick Setup Quick Setup Download
BIPAC5102SG_QSG_11092005_EN.pdf 1.0 User Manual User Manual Download